WI-TEK Wireless CPE（PoE Passthrough) QIG(WI-CPE513P-KIT)
Created by: alun wang
Modified on: Wed, 17 Jun, 2020 at 11:43 AM
IF YOU WANT TO DO PTMP connection, just short press reset of Master CPE and several Salve CPE in one minutes, they will auto paired
Press Reset button both side in 1 minutes(click Master CPE first,then click some Slave CPE one by one)
for Master CPE, you need choose AP mode
for Slave CPE, you need choose repeater mode, then scan Master CPE's SSID to conenct
you need modify second Slave CPE and third Slave CPE IP address from default value 192.168.1.89 to 192.168.1.X(X can not be 88 or 89)
Did you find it helpful?
Sorry we couldn't be helpful. Help us improve this article with your feedback.