2.4G and 5.8G PTP/PTMP CPE and CCTV Transmitter

LED Display Wireless Transmitter for CCTV QIG(WI-CPE111-KIT WI-CPE511-KIT)
Wed, 17 Jun, 2020 at 9:53 AM
WI-TEK Wireless CPE(PoE Passthrough) QIG(WI-CPE513P-KIT)
IF YOU WANT TO DO PTMP connection, just short press reset of Master CPE and several Salve CPE in one minutes, they will auto paired  Press Reset...
Fri, 7 Aug, 2020 at 2:25 PM
2.4G and 5.8G Outdoor CPE QIG(WI-CPE211,WI-CPE515,WI-CPE515KIT,WI-CPE517,WI-CPE518,WI-CPE518-KIT,WI-CPE900-KIT)
Mon, 22 Jun, 2020 at 2:24 PM
2.4G and 5.8G Outdoor CPE User Manual((WI-CPE211,WI-CPE111-KIT,WI-CPE511-KIT,WI-CPE515,WI-CPE515KIT,WI-CPE517,WI-CPE518,WI-CPE518-KIT,WI-CPE900-KIT)
WI-CPE111-KIT, WI-CPE511-KIT has Digital Switch function, if you want to enter into web page to config, need close the Digital function first(if close Digit...
Mon, 22 Jun, 2020 at 4:33 PM
How to Check Repeater Signal Strength on WI-CPE513P-KIT
There are two ways to check Repeater Signal Strength on Product WI-CPE513P-KIT; one is you go to Repeater mode CPE(Slave)'s web config GUI to check: ...
Fri, 7 Aug, 2020 at 4:40 PM
How to set repeater mode to repeate main wireless router signal(WI-CPE211 V2,WI-CPE513P-KIT)
1. change CPE DIP to C position H mean Master CPE(AP mode) C mean Slave CPE(Repeater mode) 2. enter into IP address show A089 mean ...
Mon, 19 Jul, 2021 at 9:41 PM